Double Glazed Window Repair

double glazing window repair glazing is an energy efficient investment that reduces loss of heat during winter and keeps your home cool in the summer. Having your double glazed windows fixed when they need to is a great way to ensure that they function effectively.

Over time, condensation and misting can impact your double-glazed windows. This can cause your double-glazed windows to be difficult to open or close.

Broken Panes

A ball that is rogue or a stone flying from your lawnmower or even a strong storm can shatter the double pane windows of your home, leaving you home vulnerable to the elements. While a damaged glass window isn't easy to fix however, it does not need to be replaced. In fact, the insulated glass between the two panes is in good shape, and you can fix your double-pane windows with a bit of DIY effort.

To begin, you'll need take the broken glass out of the frame. You'll need to be cautious to avoid any glass shards falling to the floor or double glazed window repair falling from the frame. Wear work gloves to protect your hands, and place an abrasive cloth around the damaged glass to avoid further damage or cuts. After you have removed the broken glass clean the frame of the window thoroughly to remove any sealant or debris. Sand rough areas of the frame to create a smooth surface on which to install your new glazing.

After cleaning the frame, you can apply a new layer of glazing to the place in which the broken pane was removed. This is the best method to protect and seal your window. It will also save you money by preventing water and drafts from entering your home. The next step is to choose your glazing material. There are a variety of options including clear tape which is more durable than regular tape and prevents further cracking of your window, or glazing film, which is similar to clear plastic wrap. The benefit of this type of material is that it can be painted to match the frame you have and will also keep out snow and rain as well.

Whatever the material you pick regardless of the material you select, it is crucial to press glazier's points into the seam where the putty meets the frame. These will hold the glass in place and aid in adhering to the frame. Hardware stores carry glazier's point ropes that can be rolled out on the frame rabbets.

Condensation

Double glazing can be prone to condensation issues and if you encounter this issue, it is recommended to contact the company that installed the window. Many companies provide warranties and guarantees that provide coverage for these issues. Condensation and fogging in the panes of glass is an obvious sign that the seals between your windows are damaged and can only be fixed by an expert who will repair both panes.

This process is a little complicated and requires the use of specific tools to remove the old pane and then install the new one, but it can be done by a professional who will provide the necessary equipment. It is recommended to leave the work to professionals. These tools can be dangerous.

Wear safety glasses and gloves if you decide to do it yourself. You may be exposed to glass fragments flying around. It is crucial to remove any putty or metal glazing points from the grooves that will be receiving the new window. You should also brush the frame with wire, and then vacuum or wipe with a damp cloth. After the frame has dried, you'll need to order another piece of glass that is 1/8" shorter in both directions than the existing window. Check the glass's fit into the grooves.

Based on the frame you have, you will then need to apply the caulk to the grooves to ensure that your new pane is securely in the right place. Once the silicone caulk has dried and cured, you can smooth it out and make any adjustments. The wood molding will then be put back in place.

If the weather abruptly changes, double-glazed windows can be difficult to open and close. Extreme temperatures may cause the frames of double-glazed windows to expand or contract, causing them to sag and stick. You can try wiping the frames with water and lubricating them in the event that this happens however it is better to seek help from the company who installed your windows.

Misunderstood

When moisture gets trapped between the glass panes, it can cause misted double glazing. Double glazing consists of two panes of glass which are separated by an insulating area, typically filled with argon gas for improved thermal efficiency. This creates a airtight seal that keeps warm air inside and cold outside air out.

In time, however, this seal will begin to break down and moisture can begin to build up between the window panes, which causes them to turn misty. This happens because the gap between the panes gets heated by the sun, causing water vapour to develop in it.

This is a normal process, but when it occurs between the window panes, it can be a problem since it will no longer be able to regulate the temperature of the room and will allow the outside temperature to influence the indoor temperature. Northfield Glass can help you in the event that your double-glazed windows begin to mist.

We can replace a single blow sealed unit, without the need to replace the entire window. This is far less disruptive than a complete replacement. Our misty glass repair involves removing and cleaning the glass, then replacing it with a new one. This will result in a watertight seal again.

There are some companies in the field that claim to cut holes into your windows that are misting and inject chemicals into them, which they claim will eliminate the condensation and fog but we do not recommend this method. This method is not just unattractive, but could also damage your toughened glass leaving you with a window which isn't functioning properly.

If you don't address the issue quickly, it could lead to mould, which can not only damage the window, but could also pose health risks to your family members. The condensation in the window could also lead to other problems within your home like damp or rot. In some instances, the window may need to be replaced completely.

Blown or failed

Double-glazed windows are comprised of two glass panes with an air or inert between them. This improves their thermal efficiency, allowing the cold out and heat in. Over time the gas may become depressurised and cause many issues.

One of the most frequent is condensation between the panes. While it is a natural occurrence and doesn't mean that your window has failed however it could be a sign that you need to re-seal your windows. Condensation is also an indication of broken double glazing, which could need to be replaced.

Double-glazed windows can also create drafts. This could be because of the seal being damaged or handle that is broken, or a broken lock. It is important to fix the issue as quickly as possible. A draught will cause you to spend more on heating. Check the seals around the window frame by feeling the cold air.

Another indication that your window seals have failed is when you begin to notice water beads on the inside of your windows. This is an indication that you need to replace the seals on your double-glazed windows.

Your window frames have been designed to move a bit, which is necessary to keep the glass sheets in place. As time passes, this particular packaging material may be compressed. This could cause the seal to become broken. This allows air to flow between the panes and reduce the energy efficiency of your window.

A damaged seal is a clear sign that your double glazing has failed and must be fixed as soon as possible. A blown seal will stop your double glazing performing its primary purpose, which is to keep the cold out and warm air in. Additionally, a blown seal will let your home's moisture in, which can cause mold and other uncomfortable conditions. It is recommended to contact a double glazing repair window expert when you discover a blowing seal in your double glazed windows, as they are able to replace the entire unit.